Answers to frequently asked questions KVM switch

Q1:The mouse will fail to work when manual KVM in the shutdown

Cause: When the shutdown ,the host mouse to close the program.

Conclusion: To avoid the above, when the click on the "shutdown" after the host has not been fully completed before the program shuts down quickly switch to the next is not Taiwan host shutdown.

Q2: For more than one host and switch the system boot and shutdown sequence of how?

Conclusion: The boot time, it is recommended users switch to open and then open the host in turn.

Q3: When hot-plug, individual hosts may be faulty mouse?

Cause: This is because the individual motherboard does not support PS / 2 mouse caused by hot-swappable.

If there is OSD menu function, you can use the "OSD" in order to activate the mouse port.

Or: check whether the mouse cable OK! For another mouse and try again,

Q4: OSD does not show the window?

Cause: This is because the display refresh rate is too high a result, adjust the display's refresh rate to 75Hz 1280 × 1024 or 85Hz 800 × 600.

Q5: boot or when switching audio prompt appears twice, or a long tone?

Cause: This is because the switch is connected to the keyboard or mouse or malfunction caused by poor contact of